2020. 1. 23. 20:15ㆍ카테고리 없음
Compat-wireless-2010-06-26-p.tar.bz2 - direct link Download at link4gen.com, download compat-wireless-2010-06-26-p.tar.bz2 from premium 4shared link, date: 2015-06-12T12:35:14.000Z. Toggle navigation Link4gen.com. Disclaimer; Link4gen 4shared premium link generator. Get link download compat-wireless-2010-06-26-p.tar.bz2. New project change. This project compat-wireless has been renamed compat-drivers, and latter to backports, and new documentation information will be based on the following page as of the v3.7 releases:. Linux-stable backports releases. Linux-next backports releases. This page will only host information for the old stable releases up to the v3.6 releases. This project compat-wireless has been renamed compat-drivers, and latter to backports, and new documentation information will be based on the following page as of the v3.7 releases: linux-stable backports releases. Linux-next backports releases.
Compat-Wireless for Linux 2.6.25+One of the challenging aspects of installing the Linux operating system on both new and oldcomputers is ensuring stable and fast networking capability. Modern Kernels, especially since the release ofLinux 2.6.28, have included drivers for network interfaces commonly installed on most computers. Somewireless drivers did not have a smooth start, as evidenced by the need for refinements and patches to theRalink RT-73, RT-2860, and Realtek RTL-8187 drivers. As of Linux 2.6.33, these drivers work very nicelywith their wireless chipsets, and in many cases run the hardware more effectively than the drivers inMicrosoft Windows operating system.One reason for the recent jump in quality wireless driver software within the kernel is due tothe inclusion of the Compat-Wireless driver package. Compat-Wireless has evolved over the past few years, froma rough batch of drivers written and patched by a few people seeking better performance to a comprehensiveset of Wi-Fi and bluetooth drivers that provide a stable and nicely optimized networking framework. As newWi-Fi or bluetooth devices are released, the Compat-Wireless team are at the forefront of writing the raw codethat runs the devices in Linux. The newest 'bleeding edge' drivers can be installed on any computer runningLinux as old as kernel 2.6.25, so older computers can indeed use modern wireless interfaces in Linux.INSTALLING COMPAT-WIRELESS DRIVERSInstalling the Compat-Wireless drivers requires about fifteen minutes and is not difficult fora person with average computing skills.
The procedure requires downloading the source code, navigating to itin a file manager, and executing some commands in the directory holding the source code. The result is asystem using the most recent wireless and bluetooth drivers - perhaps weeks or months ahead of the time thesedrivers would appear in the mainline kernel. It is perhaps the best way to enable Linux wireless on a systemwith bleeding edge networking hardware installed. To make and install source code, you must have your kernel headers installed!. Visit the. Scroll down to find the 'bleeding edge'compat-wireless-2.6.tar.bz2. Download the compat-wireless source package.
Navigate to the location of the source package, and extract it by opening a console windowand using the 'tar' command:ironhand@onosideboard:$ tar -xjvf compat-wireless-2.6.tar.bz2. Build and install the package by executing (as root) the make and install commands:ironhand@onosideboard:$ sudo make && make installsudo password for ironhand:For the next few minutes, the console window will display very many lines of text as thecompat-wireless drivers are compiled and installed.
When this stage of the process is complete, a list ofthe wireless and bluetooth driver modules on the system will be displayed, along with the followinginstruction:Now run:sudo make unload to unload both wireless and bluetooth modulessudo make wlunload to unload wireless modulessudo make btunload to unload bluetooth modulesAnd then load the wireless or bluetooth module you need. If unsure reboot.Alternatively use sudo make load/wlload/btload to load modulesThe compat-wireless drivers are now ready to load. Reboot the computer or simply issue thefollowing command to unload the current drivers and replace them immediately with the compat-wireless drivers:ironhand@onosideboard:$ sudo make unload && sudo make loadsudo password for ironhand:The Compat-Wireless drivers are known to work well, with minimal problems. If, however, yourcomputer is having compatibility issues or perhaps is unstable with these bleeding edge Linux wirelessdrivers, visit the.Tags: Compat-Wireless, Linux 2.6.25+, linux wi fi.
Contents.Download latest Linux wireless driversYou can now download a package which lets you compile and install the latest advances on the Linux wireless subsystem and get some of our latest drivers without having to recompile your entire kernel. We provide compatibility support since 2.6.22 as that is when was introduced onto the stock kernel. This adds, and any new non-mac80211 driver (libertas).If you'd like to keep the wireless-2.6 git repository local as well, please read out which explains how to achieve this.
Download Compat Wireless Kali Linux
With a local git repository you can update the compatibility package yourself. For more information on how to do this please refer the section below.Where to downloadYou can download this package here:This package is updated daily. It reflects the latest on wireless-2.6.git 'everything' branch.Building and installingExtract:Extract the content of the package:tar jxvf compat-wireless-2.6.tar.bz2Build:Build the latest Linux wireless subsystem:cd compat-wireless-2.6makeInstall:We use the updates/ directory so your distribution's drivers are left intact.sudo make installUninstall:This nukes our changes to updates/ so you can go back to using your distribution's supported drivers.sudo make uninstallLoad:This unloads your old and wireless drivers and loads the new shiny ones. For example if and its proprietary daemon are found it'll be stopped and the module unloaded and then will be loaded.sudo make loadDriversWe'll add more as we go on testing them throughout the old supported kernels. Only tested drivers will be added.
2.6.222.6.23OK?OK?OK???OK???????OK?????OK???????OK???OK?Known issues. Strange wireless device names:On Ubuntu and Fedora you may end up with strange network device names, for example, wlan0rename.
This is a known issue and will be worked on.:More compatibility work is needed to add. b43:b43 and b43legacy now load. Since there was an old softmac broadcom driver we provide a load script for this driver. To load the new generation drivers (b43 and b43legacy) you can run:sudo b43load b43To revert back to ath5k you can run:sudo b43load bcm43xx.:If is present the build system will detect this and disable it.
It does this by simply renaming athpci.ko to athpci.ko.ignore. This lets us disable the driver without blacklisting it which could cause issues with users later. If you would like to enable at a later time and disable ath5k you can run:sudo athload madwifiTo revert back to you can run:sudo athload ath5kWhy was this work done?It was done for users or developers stuck on older kernels that want to help test or patch wireless work.
Additionally if you're on a recent kernel this lets you get the latest and greatest wireless-2.6 git work without much effort. This may mean new drivers for some users.
Last but not least we hope this will encourage vendors and developers to post patches upstream first rather than forking or maintaining their own releases with their own patches for their own drivers.BugsIf you've found a bug please report it to our linux-wireless mailing list:linux-wireless@vger.kernel.orgReport the bug because you are working with the latest and greatest. If your bug is compatibility-related then we should still try to fix it within the compat.ch work.How about compatibility work for kernels older than 2.6.22?Sure, feel free to send patches.
The main work was designed to support kernels = 2.6.22 as that was when was introduced.LicenseThis work is a subset of the Linux kernel as such we keep the kernel's Copyright practice. Some files have their own copyright and in those cases the license is mentioned in the file. All additional work made to building this package is licensed under the GPLv2.DevelopersPlease try adding new drivers, test them and if they work enable them. You can then send patches. Compatibility work goes into compat/compat.ch.